Search results

The purpose of this study is to investigate the effect of aging temperature on the barrel-type solder joint lifetime of electronic devices and to include these effects in the modified prediction model.

Several accelerated shear stress tests under different stress amplitudes and aging temperatures were performed.

It was found that by aging temperature increasing, the lifetime decreases. Morrow energy model was also found as the best prediction model when the aging temperature is taken into consideration.

It is confirmed.

In this paper, a lifetime estimation model for the solder joint is proposed which is capable of considering both severe and running mechanical shocks which is the real case in electric converters in the automotive and aerospace applications. This paper aims to asses the reliability of the solder joint under mixed exposure of mechanical loads.

Mechanical failure process may put at risk the perfect performance of any kinds of electronic systems regardless of the applications they are prepared for. Observation of solder joint health in an electronic assembly under simultaneous exposure of severe and running shocks is an open problem. Three commonly used soldering compositions are considered while the electronic assembly is exposed to three well-known driving cycles.

The results show that the best performance is achieved using SAC405 soldering alloy in comparison with Sn63Pb37 and SAC387 solder alloy. Consideration of mixed exposure to the mechanical loads leads to much more accurate lifetime estimation of the solder joint in the electronic assemblies.

The originality of the paper is confirmed.

The purpose of this study is to present a comprehensive hydrothermal analysis on an inclined mini-channel using numerical and experimental techniques. The fin array acts as heat source within the channel, and a wavy wall located at the top of the channel is heat sink. The side walls are insulated with curved profiles. Also, the channel is inclined with four known inclination angles. To solve the governing equations, the dual-multi-relaxation-time lattice Boltzmann method with D2Q9 and D2Q5 lattice models for flow and temperature fields is used, respectively. Also, the channel is filled with SiO2-glycol nanofluid.

Identifying the behavior of a thermal component during natural convective flow is a challenging topic due to its complexities. This paper focuses on analyzing the thermal and hydrodynamic aspects of a narrow channel equipping with fin array.

Two correlations are proposed considering temperature and volume fraction ranges for thermal conductivity and dynamic viscosity according to measured experimental data which are used in the numerical phase. Finally, the structure of flow, temperature distribution of fluid, local thermal and viscous dissipations, volume-averaged entropy production, Bejan number and heat transfer rate are extracted by numerical simulations. The results show that the average Nusselt number enhances about 57% (maximum enhancement percentage) when volume fraction increases from 1% to 3% at Ra = 10⁶ and θ = 90°. In addition, the value of entropy generation is maximum at φ = 1%, Ra = 10⁶ and φ = 90°. Also, the maximum enhancement of entropy generation in range of Ra = 103 to 106 is about 4 times at φ = 1% and θ = 90°.

The originality of the present study is combining a modern numerical method (i.e. dual/multi-relaxation-time LBM) with experimental observation on characteristics of SiO₂-glycol nanofluid to study the thermal and hydrodynamic properties of the studied mini-channel.

The nanofluid flow and heat transfer within a heat exchanger, with different thermal arrangements of internal active bodies, are investigated.

For the numerical simulations, the lattice Boltzmann method is utilized. The KKL model is used to predict the dynamic viscosity of CuO-water nanofluid. Furthermore, the Brownian method is taken account using this model. The influence of shapes of nanoparticles on the heat transfer performance is considered.

The results show that the platelet nanoparticles render higher average Nusselt number showing better heat transfer performance. In order to perform comprehensive analysis, the heatline visualization, local and total entropy generation, local and average Nusselt variation are employed.

The originality of this work is carrying out a comprehensive investigation of nanofluid flow and heat transfer during natural convection using lattice Boltzmann method and employing second law analysis and heatline visualization.

This paper aims to numerically investigate the nanofluid flow, heat transfer and entropy generation during natural convection in an annulus.

The lattice Boltzmann method is used to simulate the velocity and temperature fields. Furthermore, some special modifications are applied to make the lattice Boltzmann method capable for simulation in the curved boundary conditions. The annulus is filled with CuO-water nanofluid. The dynamic viscosity of nanofluid is estimated using KLL (Koo-Kleinstreuer-Li) model, and the nanoparticle shape effect is taken account in calculating the thermal conductivity. On the other hand, the local/volumetric entropy generation is used to show the irreversibility under influence of different parameters.

The effect of considered governing parameters including Rayleigh number (103<Ra < 106); nanoparticle concentration (0<<0.04) and configuration of annulus on the flow structure; temperature field; and local and total entropy generation and heat transfer rate are presented.

The originality of this work is using of lattice Boltzmann method is simulation of natural convection in a curved configuration and using of Koo–Kleinstreuer–Li correlation for simulation of nanofluid.

The purpose of this study is to address a problem in cooling of an electronic package where the dissipating fins transfer the extra heat energy from the heat source (i.e. electronic devices) to the heat sink (i.e. environment). To this end, the convective heat transfer of nanofluid flow over dissipating fins is simulated using a numerical approach, whereas the properties of nanofluid are evaluated based on the experimental measurements and used in the numerical process.

To simulate the convective flow, the lattice Boltzmann method is used. Also, the curved boundary scheme is used to enhance the capability of lattice Boltzmann method (LBM) in the simulation of natural convection in curved boundaries. In addition, the second law analysis is used based on total and local approaches.

To improve the cooling performance of fins, a modern technique is used, which is using of nanofluid. For this purpose, samples of SiO₂-liquid paraffin with mass fractions of 0.01, 0.05, 0.1, 0.5 and 1 (Wt.%) in a temperature range of 25–60 °C are provided, and the required thermal and physical properties of samples including thermal conductivity and dynamic viscosity are measured during experimental work. The extracted results are used in the numerical simulations using derived correlations.

The originality of the present work is using a modern numerical method in the investigation of an engineering application and combining it with experimental data.

The lattice Boltzmann method is used to simulate the nanofluid flow and heat transfer inside a finned multi-pipe heat exchanger.

The heat exchanger is filled with CuO-water nanofluid. The Koo–Kleinstreuer–Li (KKL) model is used to estimate the dynamic viscosity and considering the Brownian motion in the simulation. On the other hand, the influence of nanoparticles’ shapes on the heat transfer rate is considered, and the best efficient shape is selected to be used in the investigation.

The Rayleigh number, nanoparticle concentration and the thermal arrangements of internal active fins and bodies are the governing parameters. In addition, the impacts of these two parameters on the nanofluid flow, heat transfer rate, local and total entropy generation and heatline visualization are analyzed, comprehensively.

The originality of this work is using of lattice Boltzmann method for simulation of nanofluid flow and heat transfer during natural convection in a heat exchanger. Furthermore, influence of the shape of nanoparticles on the thermo-physical properties of nanofluid is analyzed using Koo–Kleinstreuer–Li correlation.

This paper aims to investigate the natural convection fluid flow and heat transfer in a finned/multi-pipe cavity.

The cavity is filled with the CuO-water nanofluid. The Koo–Kleinstreuer–Li model is used to estimate the dynamic viscosity and consider Brownian motion. On the other hand, the effect of the shapes of nanoparticles on the thermal conductivity and related heat transfer rate is presented.

In the present investigation, the governing parameters are Rayleigh number, CuO nanoparticle concentration in pure water and the thermal arrangements of internal active fins and solid bodies. Impacts of these parameters on the nanofluid flow, heat transfer rate, total/local entropy generation and heatlines are presented. It is concluded that adding nanoparticles to the pure fluid has a significant positive influence on the heat transfer performance. In addition, the average Nusselt number and total entropy generation have direct a relationship with the Rayleigh number. The thermal arrangement of the internal bodies and fins is a good controlling tool to determine the desired magnitude of heat transfer rate.

The originality of this paper is to use the lattice Boltzmann method in simulating the nanofluid flow and heat transfer within a cavity included with internal active bodies and fins.

The purpose of this paper is to improve the lattice Boltzmann method’s ability to simulate a microflow under constant heat flux.

Develop the thermal lattice Boltzmann method based on double population of hydrodynamic and thermal distribution functions.

The buoyancy forces, caused by gravity, can change the hydrodynamic properties of the flow. As a result, the gravity term was included in the Boltzmann equation as an external force, and the equations were rewritten under new conditions.

To the best of the authors’ knowledge, the current study is the first attempt to investigate mixed-convection heat transfer in an inclined microchannel in a slip flow regime.

The purpose of the present work is to investigate the hydrodynamic and thermal performance of a thermal storage based on the numerical and experimental approaches using the lattice Boltzmann method and the experimental observation on the thermo-physical properties of the operating fluid.

For this purpose, the Al₂O₃ nanoparticle is added to the lubricant with four nanoparticle concentrations, including 0.1, 0.2, 0.4 and 0.6Vol.%. After preparing the nanolubricant samples, the thermal conductivity and dynamic viscosity of nanolubricant are measured using thermal analyzer and viscometer, respectively. Finally, the extracted data are used in the numerical simulation using provided correlations. In the numerical process, the lattice Boltzmann equations based on Bhatnagar–Gross Krook model are used. Also, some modifications are applied to treat with the complex boundary conditions. In addition, the second law analysis is used based on the local and total views.

Different types of results are reported, including the flow structure, temperature distribution, contours of local entropy generation, value of average Nusselt number, value of entropy generation and value of Bejan number.

The originality of this work is combining a modern numerical methodology with experimental data to simulate the convective flow for an industrial application.